|
|
Technical Articles & Information |
|||
Most
of these articles are from people other than myself who have either more experience or
knowledge about the subject than I do. If they are listed here, then I either recommend
them or have even used them myself. I have also included comments about each. |
|||
| Topic | Author / Link | Comments | |
| 1) Programming EPROMS for GM TPI Systems | ThirdGen.org http://www.thirdgen.org/newdesign/tech/promintro.shtml |
Highly recommended article. Includes a breakdown of what you need to get started. | |
| 2) ALDL Software | Craig Moates http://moates.net/gmecm/software.html |
ECM852 - Reads L98 TPI and LT1 TPI systems | |
| 3) ALDL Interface Schematics | Andrew Mattei / Craig
Moates http://members.cox.net/craig.moates/images/AKM232.jpg |
Use the AKM schematic or buy one from Andrew Mattei. I believe this works with all TPI systems (TBI also?) | |
| 4) TPI and Engine Basics | ChevyThunder.com http://www.chevythunder.com/ |
A lot of good tips for troubleshooting and modifying TPI engines. | |
| 5) RS232 Communications - Tutorial | http://www.arcelect.com/rs232.htm | This tutorial explains how RS232 communication works. Might be handy in trouble shooting the ALDL interface. | |
| 6) 10 Segment Air/Fuel Ratio Meter Schematics | Jari Porhio's Project
from DYI_EFI.Org http://www.students.tut.fi/~eppu/dev/EGO-bar.html |
Very, very helpful in tuning your fuel injected system. Just needs a signal from your O2 sensor (I prefer heated), sensor ground, and 12volt source (or 9V battery if you like,) | |
| 7) DIY_EFI and GM_ECM Websites | http://www.diy-efi.org/ | Plenty of usefull information, articles, and projects for the fuel injection "Do-it-yourselfer". | |
| 8) Choosing a TPI System | Street and Performance http://www.hotrodlane.cc/Streetstories/choosetpi1.htm |
Want to know the differences in TPI systems by make and model? Check this site out. Need more answers about converting to TPI? Give these guys a call. If you can think it they've probably done it. | |
This website contains information obtained through personal experience, word-of-mouth, or by reading and should be readily available to the general public. Atempts have been made to note and credit any information subject to copyright laws. Please let me know if any information is found which has not been. |
|||
Updated: 04.20.2005 - Email Me |
|||
